Fix Hoverboard Not Working Issues (Problem Solved)

A hoverboard is not a toy which is easy to handle. It is a valuable and latest device that is used for travelling. The stylish and modern look of hoverboard has attracted many kids as well as youngsters. This self-balancing device is amazing when you know to use it. There are some critical issues which are observed by the owners.

Most of the users immediately take the scooter for repair if it gives trouble, but the problems are common. You don’t need any professional guidance to fix the issues if you try to solve it yourself. It is faced by all self-balancing scooter owner at a time. The device might work absolutely fine in starting and after some time of usage, it gives trouble. The owners notice a red light blinking continuously.

In this case, something is definitely inaccurate with the scooter, and you have to solve this immediately as the issue can worsen. Many obstacles that occur are caused by misconfigurations issues of the board. This can result in poor stability. The problem is that the hoverboard cannot figure out if you are riding on a flat surface or moving on the slanted road or you are not moving at all, but standing in one place.

In this article, we will discuss the methods to fix Hoverboard Not Working Issues. This guide will help you to solve the basic problems with hoverboards. After buying a new hoverboard, it may need calibration to solve the problems related to functions of the board which helps in balance and fundamental actions. The problem can also occur if the hoverboard is old and stops working.

The old one will definitely start giving trouble compared to the new product. Now, let’s begin with the full troubleshooting guide. If you have other problems related to any smartphone, then feel free to contact Gadget Features Forum.

Fix Hoverboard Not Working Issues (Problem Solved)

Reset Hoverboard

Fix Hoverboard Not Working Issues (Problem Solved)

Many owners have complained that the device is not moving forward or backwards. Whenever these difficulties arise, the first method which the users must try is the master reset. If the self-balancing device refuses to calibrate, you must try eliminating its rear case. After that re-insert the wires present inside the device. Now, master restarts the device by one of the methods given as follows.

1st Method:

1. Turn off the hoverboard and place it on a flat table or floor.
2. Press the ON/OFF button for a few seconds.
3. Now, release the on/off button until you notice a small Red Circle on the device.
4. Soon after the circle goes, you have to turn the board on.

2nd Method:
1. Turn ON the board and the device should not produce a whilst calibration sound at this time.
2. Press the ON/OFF button for a few seconds.
3. You will notice a red light flashing on the board.
4. Now, release the ON/OFF button.
5. Turn the board in the rear position.
Now, check if the board is working again.

One side of hoverboard not working

Fix Hoverboard Not Working Issues (Problem Solved)

Sometimes, one side stopped working and the other side works. In this case, you have to notice the red light. Follow this instruction:

1. If you notice the red light only one time, then you have to check the wires or cables which can be loose. Remove the cover of the hoverboard and remove the screw to open. Make sure that the device is off. Now, tighten the loosened cables and wires. Re-insert the wires if you don’t find any loose wires.

2. If you notice the red light flashing more than once, the internal circuit might be defective or damaged. Now, you have to replace the circuit board for which you have to spend some amount. If you cannot replace it then, contact a technician.

3. If the red light is flashing more than three times, it symbolises that the motor requires replacement. If the light is blinking more than six times, replace the battery to enjoy your rides. Seven times blinking means gyroscopes need repair. If the device turns on but doesn’t move, then this might solve the issue.

Charging problem

Fix Hoverboard Not Working Issues (Problem Solved)

At first, check if the device is charging or not. You should also make sure if the charger has any fault. If the green light is not displayed on the charger case, it means that the board internal circuits are damaged. You can replace the circuit. Similarly, if the green light appears on the box, press the on/off key to switch the hoverboard on. You will notice an orange light which indicates that the battery needs to be replaced. If the charger not working, then purchase a new one.

Device not turning on and off

Fix Hoverboard Not Working Issues (Problem Solved)

Sometimes, the hoverboard generates beeping noise and you keep on pressing the off button. Although, it won’t turn off. In this case, don’t hesitate to unscrew the board. Turn the board on a flat surface and gently take out the battery which will stop the weird noise. If the cables are loose or the attachments are not accurate, you just have to reconnect.

First, remove the screws and move to the lower end of the internal circuit. You will easily find the central circuit board, and begin separating and reconnecting the wires. If the motherboard is damaged, then you can purchase and replace it immediately.

Wheel not moving

Fix Hoverboard Not Working Issues (Problem Solved)

In some situations, the hoverboard light remains on, but it doesn’t start or run. Here, it is possible that both of the gyroscopes are now useless. You can solve this issue by purchasing the latest gyroscope from a nearby store or from online. You can easily replace the gyroscope. You can buy it from Amazon if you need immediately, the get it from Alibaba, which has affordable products.

If the device is not moving, then the issue can be that the pad is thumped. The device cannot recognise the owner’s step so, it’s not working properly. You can resolve this problem by turning off the device and shifting the pads. Check if the pads are at the correct location. You can also try removing the lower plastic cover and re-insert the pads.

Wheels Are locked problem

Fix Hoverboard Not Working Issues (Problem Solved)

Calibration issue can also cause some severe problems in the hoverboard. Simply recalibrate the device to solve the issue. Follow these methods to calibrate the board.

1. Link the hoverboard with your smartphone application.
2. Place it on a flat surface.
3. Navigate to the “your brand” mobile app section and tap on the “calibrate the unit”.
4. Simply, go with the instructions which appear on the screen.
5. Press the button for a few seconds and restart.

Device stops suddenly and beeps

Sometimes, the hoverboard can’t sense your footstep. Turn the device on the rear and open the board. You have to check the pressure sensor which is generally placed near the wheel. As soon as the device senses your steps, two tiny wings combine and the board starts moving. If this is the issue, then replace the sensor.

Hoverboard won’t turn on without charger

Fix Hoverboard Not Working Issues (Problem Solved)

If the device doesn’t work without a charger, then it might be charging slowly. The problem starts when you use a defective charger from the beginning and it originates the issue. Overcharging the device can also result in the device problems. You must use the original charger to charge the device.

The green light on the charger box means it won’t move. It remains on and the red light rises with a beeping sound when it is switched on. You can replace the battery if the device is not charging properly.

Final Verdict

So, this was the full troubleshooting guide to fix Hoverboard Not Working Issues. If the issue is not yet solved, then take the device to a mechanic or contact the company centre. Although, these methods are very effective to fix the hoverboard issues. I hope you liked this article and it solved your issue. You can share this post with your friends and relatives who are worried about their self-balancing scooter issues.